![]() ![]() ![]() Have maintenance and repair work on the multimeter carried out only by qualified specialists.If you are not going to use the device for a longer period of time, remove the battery from the compartment.Electric shocks and physical damage can result. Insufficient battery power can lead to inaccurate measurement results. Charge the battery or change the battery as soon as the battery symbol lights up.Never short-circuit a fuse or fuse holder. Replace defective fuses only with a fuse that corresponds to the original value.Switch off the multimeter before changing batteries or fuses and also remove all test leads and temperature probes.Change the battery when a battery symbol is displayed to avoid incorrect readings.If in doubt, do not take any measurements. Before each use, check the device and its accessories for damage to the insulation, cracks, kinks and breaks.Never use the device if it is not completely closed.Before starting the measuring operation, the device should be stabilized at the ambient temperature (important when transporting from cold to warm rooms and vice versa).When working in damp or outside areas, pay particular attention to completely dry handles on the test probes.If no IP protection class is specified, only use the device in dust-free and dry indoor rooms only.Only use devices in damp or dusty environments in accordance with their IP protection class.Avoid storage and use in extremely cold, humid or hot environments, as well as long exposure to direct sun.Avoid working in environments with high interference frequencies, high-energy circuits or strong magnetic fields, as these can negatively affect the multimeter.Do not carry out measurements in corrosive environments, the device could be damaged or contact points inside and outside the device could corrode.An electric spark could lead to an explosion or deflagration – danger to life! Avoid any proximity to explosive and flammable substances, gases and dust.To avoid electric shock, never connect it with a live conductor. The thermocouple for temperature measurements is made of conductive material.If applicable, discharge any capacitors before measuring the circuit to be measured. Never touch the bare test probes during the measurement, only hold the test leads by the handle behind the finger guard.Remove the test probes from the measurement object before changing the measuring function. ![]() FINEST 201 MULTIMETER USERS MANUAL SERIES
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |